Coated fasteners are often described in conversation by colour: silver, clear, yellow, black, olive or a similar appearance word. On a made-to-print order that description is not a coating system. Several deposits and several after-treatments can share a similar look, and the same named system can be specified in more than one colour. The current revision has to name the standard, the system and any topcoat or lubricant. A colour chip, a photograph, or a reference to “the black ones we had last year” is not a substitute for that call-out.
What has to be visible on the revision
A complete call-out names the coating system or the customer specification, the after-treatment or topcoat, the thickness or performance class, and the appearance if appearance is controlled. “Black zinc” or “silver flake” without a specification is not complete. If a standard already ties a colour to a particular chromate, seal or topcoat, the enquiry should name the edition when the print itself does not. The same need to name the system is already set out for named zinc-flake systems and for zinc-nickel and electroplated zinc.
Friction and lubrication can change both appearance and torque-tension behaviour. A dry-film, a wax or an oil that darkens or brightens the surface is part of the finished condition when the specification includes it; informal oiling is not, as in the notes on friction class and on lubrication and friction modifiers.
Appearance is inspected only as specified
Visual standards, colour references, gloss, or a limit on bare spots and stains are used when the print or the order requires that evidence, not automatically against a remembered sample. If a particular colour standard, a limit sample, or a first-article appearance photograph is already decided, name it and control it as a document. A visual check that “it looks black enough” is not a substitute for the system name or the thickness written on the print. Related checks are discussed in the note on appearance, adhesion and coating inspection.
Changing colour is still a process change when the system is named
A change from a clear to a black seal, or from a silver to an olive flake topcoat, can change chemistry, friction and IMDS content even when the base deposit is unchanged. If the specification names that after-treatment, the change is a process and specification change and is re-validated before serial release. A sample accepted in one colour is not automatic approval of another colour of a different system.
Open items and conflicts
A print that specifies only a colour, or that names one system in the title block and a conflicting colour-only note in a release, is flagged. Those conflicts are resolved on the revision, not at the coating line by matching a previous lot. An IMDS entry, when required, has to follow the actual system, not the colour word, as in the note on IMDS entries and the material grade.
Purchasing language has to be translated back to the print
Purchase orders sometimes repeat only the colour word, or they use a local shorthand that is understood in one plant and not in another. Those phrases are compared with the current revision; they are not allowed to overwrite a named system. If the order and the print disagree, the conflict is flagged, as in the note on drawing revision control. A packaging label that shows only a colour is likewise not a coating specification.
Volume and the proposed coating route also belong in the enquiry. A change of after-treatment or of topcoat after samples have been approved, even when the colour word stays the same, is a process change and is re-validated before serial release. First-article inspection, when required, should be planned on the production-intent system, as in the note on first-article inspection. The current drawing revision remains the source of the coating requirement in every case.
The enquiry should also include any appearance limit sample or colour standard under its document number, not only as a photograph in a message. If purchasing text uses a colour word that the print does not use, that difference should be raised at the RFQ stage rather than after the first coated lot. Related thickness, adhesion and salt-spray requirements, when they exist, still have to be named as themselves. A correct colour on the wrong system is still a miss against the print. First-article inspection, when required, should record the named system and the appearance condition together, so that later lots are not judged by colour memory alone.
Storage and handling can also change how a finish looks, especially on black or olive seals and topcoats. If appearance is a controlled characteristic, packing belongs in the agreed route, as in the note on packing, labelling and lot traceability. A scuffed or oily sample is not used as a new colour standard, and a later oil or wax is not added to “even out” the colour unless the specification already includes it.
What to send with the RFQ
Send the current drawing revision, the coating specification, and any appearance standard or limit sample that already exists. If colour is a controlled characteristic, say so explicitly rather than leaving it in an email. Volume belongs in the enquiry. Unspecified points will be flagged before production rather than assumed.
This article is a capability and commercial note. It is not a certificate, a dimensional data book, or evidence of customer approval. Catalogue type codes and example grades do not replace the customer’s item number, material specification or drawing revision.