A made-to-print enquiry is reviewed against the current drawing revision, the material and finish specification, and the quality requirements for that part. The faster those three things are complete, the sooner a route can be proposed and a quotation issued. This note is written for purchasing and supplier-quality engineers who are sending an RFQ for a custom automotive fastener or a gas-equipment component. It is a checklist, not a substitute for the drawing.
SUNHY manufactures parts from the customer’s print. It does not offer a standard stock catalogue when the geometry, material, thread, coating or inspection condition is application-specific. Catalogue type codes that appear on this site — for example SH-BR-IS-034 or SH-ST-CS-054A — are SUNHY designations for capability examples. They do not replace the customer’s item number or drawing revision.
Start with the current revision
The controlling document is the current 2D drawing revision. If a 3D model is available, send it as well; it helps the review of form, tool access and secondary features, but it does not override the 2D revision unless the enquiry says so in writing. Dimensions, threads, datums, notes and the change history are read as the controlling information.
If more than one revision is in circulation, name the revision that is to be quoted. Unspecified or conflicting revisions are listed as open items. Production does not begin on an assumed interpretation.
Material, finish and thread condition
State the material as it appears on the drawing: a copper-alloy designation such as CW614N or CuZn39Pb3, a steel grade such as S355J2 or S355J2+N, an aluminium grade such as AlMgSi1 (6081) or EN AW-6060 AlMgSi T6, or a fastener grade and property class. If a class has not yet been assigned, give the mechanical requirements that will govern the review.
Finish should be equally explicit. The gas-equipment examples on this site use a natural, as-machined finish on brass and aluminium, and zinc plating on steel. Automotive fasteners are often specified with trivalent zinc, zinc-nickel, a zinc-flake system, passivation, or a wax or topcoat used to hold a friction window. Whatever is required should be written in the RFQ, including any gauging after coating and any hydrogen-embrittlement control for high-strength parts. Colour in a catalogue model does not represent the specified material or finish.
For threaded parts, include the thread system, size, pitch, tolerance class and the final gauging condition. Thread forms such as G 3/4 or G 5/4 (G 1¼) that appear in the gas-equipment catalogue are example sizes, not a default for every enquiry.
Volume, timing and the manufacturing route
Give a prototype or sample quantity, an annual or lot volume, and the intended need date. The manufacturing route — cold heading, CNC, or a combination — is assessed against the geometry, the volume and the specified properties, and is proposed before tooling is committed. Cold heading is the usual starting point inside the M4–M24 window when the form can be produced that way. Secondary CNC is added for features that cannot be formed, or for sizes and shapes outside that window. A fully machined route is used for prototypes and for parts that will remain on CNC in production.
100-piece samples are typically available in 45 days; this window is confirmed with each enquiry. For custom turned or special cold-forged nuts, typical minimum quantities are 10,000 to 50,000 pieces, depending on complexity and tooling. If a first sample is machined and later lots are to be cold-headed, that change of route must be identified and re-validated before serial release. Approval of a prototype is not approval of the production process unless the production-intent route has been confirmed.
If a process constraint has already been decided — for example that the part must remain on CNC, or that heading is preferred — say so in the enquiry. Constraints are flagged before a quotation is issued, not after release. See also cold heading versus CNC for automotive fasteners and the route from drawing to production.
Documents, packing and commercial terms
Name the documents required: for example an EN 10204 3.1 mill test certificate, dimensional or inspection records, PPAP, or IMDS entry. Scope is confirmed in the quotation. These are requests, not assumed inclusions, and they are not evidence of a blanket company certification. Quality-system certificates and third-party approvals are referenced in a quotation only after the legal entity, manufacturing site, product scope and validity have been confirmed for that order. Documents that can be confirmed per order sets this out in more detail, as does the quality page.
If packing, labelling, language or a barcode requirement is already known, include it. Export packing is arranged as agreed with the order. Enquiries are handled in English. Shipments can be planned under FOB, CIF or DDP terms; the applicable term and its scope are confirmed in the offer, including the named place or port where this has a bearing on the price.
What to send, in short
- The current 2D revision, and a 3D model if available
- Material and finish, as specified on the drawing
- Thread system and the final gauging condition, including after coating if relevant
- Volume and timing, including any sample quantity
- Documents required
- Any process constraint already decided
- For weld or installation elements, how the part is fitted, tightened or welded
The same path is used for weld nuts, special nuts, bolts and studs, and for gas-equipment accessories such as brass connecting stubs and diaphragm housings. SUNHY does not manufacture complete regulators, slam-shut valves, filters or stations — only accessories and component parts made to the print.
Send the drawing to anna@sunhyings.com, or use the request form. Unspecified points will be flagged before production rather than assumed.
This article is a capability and commercial note. It is not a certificate, a dimensional data book, or evidence of customer approval. Catalogue type codes and example grades do not replace the customer’s item number, material specification or drawing revision.