Gas-equipment components · Carbon steel

Steel connecting stubs

Steel stubs are produced in S355J2 or S355J2+N, as specified on the drawing, and are typically zinc plated. They are accessories for equipment piping interfaces, not a standard stock range, and not a complete station or regulator.

This page describes a made-to-print capability, not a stock catalogue. Manufacture follows the customer’s current drawing revision, together with the stated material, finish and quality requirements. Unspecified points are flagged before production rather than assumed.

Capability example of a steel connecting stub, catalogue type SH-ST-CS-054A. Colour in the model does not represent the specified material or finish.
Capability example SH-ST-CS-054A. Colour in the model does not represent the specified zinc-plated finish. Not a stock item.

Capability examples from the 2026 gas-equipment catalogue

Steel connecting stub capability example SH-ST-CS-054A with a G 5/4 thread, shown as a catalogue render.

SH-ST-CS-054A

Steel connecting stub

S355J2+N · Zinc plated · Thread G 5/4 (G 1¼)

Connecting stub for equipment piping interfaces, first example geometry.

Steel connecting stub capability example SH-ST-CS-054B with a G 5/4 thread, shown as a catalogue render.

SH-ST-CS-054B

Steel connecting stub

S355J2+N · Zinc plated · Thread G 5/4 (G 1¼)

Connecting stub, second geometry. Form, thread run-out and finish are taken from the print.

The parts shown are capability examples, not stock items. Colour in a model does not represent the specified material or finish. Geometry, material, finish and inspection are taken from the customer’s current drawing. Catalogue type codes are SUNHY designations for these examples; they do not replace the customer’s item number or drawing revision.

Typical use
Accessories at equipment piping interfaces
Example material
S355J2 or S355J2+N, as specified; the examples shown are S355J2+N
Example finish
Zinc plated; condition taken from the drawing
Example thread
G 5/4 (G 1¼) on these examples — other sizes are taken from the print
Manufacturing route
Assessed for CNC or a combined route against the geometry and volume
Scope
Component parts only — not a complete regulator, filter or station

Typical use and limits of supply

Two example geometries are shown. Both are accessories for equipment piping interfaces. Form, thread run-out, length and any sealing or wrenching features are taken from the print. The thread called up on these examples is G 5/4 (G 1¼); other thread systems are reviewed from the drawing, not assumed from this page.

SUNHY does not manufacture complete regulators, filters or regulating-metering stations.

Manufacturing route

The route — CNC, cold heading, or a combination — is proposed before tooling is committed. Many turned stubs are typically assessed for CNC, or for a combined route where volume supports it. 100-piece samples are typically available in 45 days; this window is confirmed with each enquiry.

Inspection and documents

Material, thread, finish and inspection are taken from the customer’s drawing. Zinc plating, including any gauging after coating, should be stated in the RFQ. EN 10204 3.1, inspection records and PPAP are confirmed with the order scope when requested.

What to send with the RFQ

  • The current 2D revision, and a 3D model if available
  • Specified alloy or grade, temper or delivery condition
  • Finish: natural / as machined, zinc plate, or another system, including any requirement after coating
  • Thread system and size, tolerance, and the sealing or assembly method
  • Prototype or sample quantity versus annual or lot volume, and the intended need date
  • Documents required, for example EN 10204 3.1, inspection records or PPAP — confirmed in the quotation
  • Any process constraint already decided (cold heading, CNC, or a combined route)

The quotation will address manufacturability, the proposed route — cold heading, CNC, or a combination — sample timing, and the document package. What to include in a made-to-print RFQ.

Questions buyers usually ask

Is G 5/4 the only thread that can be reviewed?

No. G 5/4 (G 1¼) is the thread shown on the two catalogue examples. The thread system, size and run-out for a production part are taken from the customer’s drawing.

Send the print for the steel connecting stub.

Include the current revision, the specified grade and the finish — including any gauging after zinc plating.