Copper, steel and aluminium · Made to print

Fittings and valve components, made to print

Drawing-controlled fittings and valve components for gas pressure-regulating, filtration and safety-valve equipment. Parts are produced from the customer drawing, material specification and quality requirements, in brass and other copper alloys, carbon steel or aluminium as specified.

This family is reviewed in the same way as a made-to-print fastener: the current drawing revision is the controlling document. The forms below are types of component that can be assessed from a print. They are not a catalogue of stock items, and they are not listed under customer or workshop names.

Thread forms on the drawing, including parallel pipe threads such as G¾ and G5/4 (G1¼), are taken from the print, together with any sealing face, machining allowance or assembly condition.

Brass and copper-alloy forms from SUNHY’s fastener range, used here as material examples.
Brass and related copper-alloy forms from the fastener range, shown as material examples. Fitting and valve geometries are reviewed from the customer print.

Materials and forms that can be reviewed

Brass / copper alloy

Typically a natural, unplated finish

Alloys reviewed to the drawing include CW614N, CuZn39Pb3, CuZn40Pb2 and CuZn36Pb2. Other copper alloys are considered when specified.

  • Union inlet stubs
  • Cast unions
  • Connecting stubs
  • Filter baskets
  • Blow-off and valve elements
  • Release elements for quick-closing valves

Carbon steel

Often zinc plated, when specified

Grades reviewed to the drawing include S355J2 and S355J2+N. The coating system and any thread-gauging condition after plating should be stated in the RFQ.

  • Threaded intermediate pieces
  • Connecting stubs
  • Threaded closing elements for filter inserts

Aluminium

As specified for the housing stage

Grades reviewed to the drawing include EN AW-6060 T6 (AlMgSi). Condition, anodising or other finish follows the print when it is called up.

  • Membrane-housing stage parts

The lists describe component types, not internal part numbers or a published stock range. Similar or variant geometries — including tubes and other turned or forged copper, brass, bronze, steel or aluminium parts — can be reviewed when a print is provided.

Precision threaded fittings in stainless steel, shown as a category example from the SUNHY range.
Precision fittings from the SUNHY range, shown as a category example. Gas-equipment unions and valve parts are reviewed from the customer print and may differ in alloy and form.
Machining bay used for turned and secondary-machined fittings and components.
Machining bay used for turned stubs, intermediate pieces and secondary operations.
Vertical turning machine used where a fitting or housing geometry requires it.
Vertical turning, reviewed where the geometry or size requires it.

What to include with the enquiry

  • The current 2D revision, and a 3D model if available
  • Specified alloy or grade, temper or delivery condition, and any restriction on leaded alloys
  • Finish: natural / unplated, zinc plate, or another system, including any requirement after coating
  • Thread system and size (for example G¾ or G5/4), tolerance, and the sealing or assembly method
  • Prototype quantity versus annual or lot volume, and the intended need date
  • Required documents, for example a dimensional report or EN 10204 3.1, confirmed in the quotation

Unspecified points will be flagged before production rather than assumed. Other drawing-controlled metal parts, beyond the families shown on this site, can also be reviewed when a print is provided.

CNC machining area used for turned and secondary-machined components.
CNC machining area used for turned parts, stubs and secondary operations. The route for a given fitting is proposed before tooling is committed.

Send the print for the fitting or valve part.

The same enquiry path is used as for automotive fasteners. The quotation will confirm material, finish, route and documents for that item.