Gas-equipment components · Carbon steel

Steel threaded adapters

Threaded adapters and intermediate pieces are made to the print for use in equipment assemblies, machined or formed as the drawing requires. They are component parts, not complete regulators or stations.

This page describes a made-to-print capability, not a stock catalogue. Manufacture follows the customer’s current drawing revision, together with the stated material, finish and quality requirements. Unspecified points are flagged before production rather than assumed.

Capability example of a steel threaded adapter, catalogue type SH-ST-TA-034. Colour in the model does not represent the specified material or finish.
Capability example SH-ST-TA-034. Colour in the model does not represent the specified zinc-plated finish. Not a stock item.

Capability example from the 2026 gas-equipment catalogue

Steel threaded adapter capability example SH-ST-TA-034 with a G 3/4 thread, shown as a catalogue render.

SH-ST-TA-034

Steel threaded adapter

S355J2 · Zinc plated · Thread G 3/4

Threaded adapter / intermediate piece for equipment assemblies, machined or formed as the print requires.

The parts shown are capability examples, not stock items. Colour in a model does not represent the specified material or finish. Geometry, material, finish and inspection are taken from the customer’s current drawing. Catalogue type codes are SUNHY designations for these examples; they do not replace the customer’s item number or drawing revision.

Typical use
Intermediate threaded piece in a gas-equipment assembly
Example material
S355J2; condition taken from the drawing
Example finish
Zinc plated
Example thread
G 3/4 on this example
Manufacturing route
Machined or formed as the print and volume require
Scope
The adapter as a component — not a complete assembly

Typical use and limits of supply

The example is a threaded adapter or intermediate piece for equipment assemblies. End forms, thread run-out, wrenching features and overall length follow the print. G 3/4 is the thread shown on this example; other thread systems are taken from the drawing.

Manufacturing route

The route is selected against the geometry and the intended volume. Cold heading may be considered inside the M4–M24 window when the form can be produced that way; otherwise CNC or a combined route is proposed before tooling is committed. Sample timing is confirmed with the enquiry.

Inspection and documents

Material, thread, finish — including any gauging after zinc plating — and inspection are taken from the customer’s drawing and confirmed with the order. EN 10204 3.1 and other documents are confirmed when requested, not assumed.

What to send with the RFQ

  • The current 2D revision, and a 3D model if available
  • Specified alloy or grade, temper or delivery condition
  • Finish: natural / as machined, zinc plate, or another system, including any requirement after coating
  • Thread system and size, tolerance, and the sealing or assembly method
  • Prototype or sample quantity versus annual or lot volume, and the intended need date
  • Documents required, for example EN 10204 3.1, inspection records or PPAP — confirmed in the quotation
  • Any process constraint already decided (cold heading, CNC, or a combined route)

The quotation will address manufacturability, the proposed route — cold heading, CNC, or a combination — sample timing, and the document package. What to include in a made-to-print RFQ.

Send the print for the threaded adapter.

The quotation will state the proposed route, the finish and the document package for that item.