Gas-equipment components · Aluminium

Aluminium diaphragm housings

These housings are component parts for a regulator-stage diaphragm, not a complete regulator. They are machined from the specified aluminium grade to the customer’s current drawing.

This page describes a made-to-print capability, not a stock catalogue. Manufacture follows the customer’s current drawing revision, together with the stated material, finish and quality requirements. Unspecified points are flagged before production rather than assumed.

Capability example of an aluminium diaphragm housing, catalogue type SH-AL-DH-01. Colour in the model does not represent the specified material or finish.
Capability example SH-AL-DH-01, a housing for a regulator-stage diaphragm — not a complete regulator. Colour in the model does not represent the specified material or finish.

Capability examples from the 2026 gas-equipment catalogue

Aluminium diaphragm housing capability example SH-AL-DH-01, shown as a catalogue render.

SH-AL-DH-01

Aluminium diaphragm housing

AlMgSi1 (6081) · Natural finish

Housing for a regulator-stage diaphragm. Faces, bores and sealing features follow the agreed print.

Aluminium diaphragm housing capability example SH-AL-DH-02, shown as a catalogue render.

SH-AL-DH-02

Aluminium diaphragm housing

EN AW-6060 AlMgSi T6 (EN 754-2) · Natural finish

Housing for a regulator-stage diaphragm, second geometry. Temper and product standard as specified.

The parts shown are capability examples, not stock items. Colour in a model does not represent the specified material or finish. Geometry, material, finish and inspection are taken from the customer’s current drawing. Catalogue type codes are SUNHY designations for these examples; they do not replace the customer’s item number or drawing revision.

Typical use
Housing component for a regulator-stage diaphragm
Example materials
AlMgSi1 (6081); EN AW-6060 AlMgSi T6 (EN 754-2), temper and product standard as specified
Example finish
Natural, as machined
Manufacturing route
Typically assessed for CNC
Scope
The housing only — not a complete regulator, and not a diaphragm or assembled stage

Housings, not complete regulators

SUNHY does not manufacture complete pressure regulators. The parts on this page are housings — machined component parts whose faces, bores and sealing features follow the agreed print. Two example geometries are shown. Other housing forms are reviewed when a drawing is provided.

Manufacturing route

Diaphragm housings are typically assessed for CNC, or for a combined route where volume supports it. The aluminium grade, temper and product standard are taken from the drawing. The examples use a natural, as-machined finish; anodising or another finish is reviewed when it is called up on the print.

Inspection and documents

Critical faces, bores and sealing features are inspected against the drawing and the agreed plan. Material evidence, including EN 10204 3.1 when requested, is confirmed with the order scope.

What to send with the RFQ

  • The current 2D revision, and a 3D model if available
  • Specified alloy or grade, temper or delivery condition
  • Finish: natural / as machined, zinc plate, or another system, including any requirement after coating
  • Thread system and size, tolerance, and the sealing or assembly method
  • Prototype or sample quantity versus annual or lot volume, and the intended need date
  • Documents required, for example EN 10204 3.1, inspection records or PPAP — confirmed in the quotation
  • Any process constraint already decided (cold heading, CNC, or a combined route)

The quotation will address manufacturability, the proposed route — cold heading, CNC, or a combination — sample timing, and the document package. What to include in a made-to-print RFQ.

Questions buyers usually ask

Does SUNHY build complete regulators?

No. The housings are component parts for a regulator-stage diaphragm. SUNHY does not manufacture complete regulators, slam-shut valves, filters or stations.

Send the print for the diaphragm housing.

Include the current revision, the aluminium grade and temper, and the features that must be held on the sealing faces and bores.