Gas-equipment components · Internals only

Slam-shut valve internals

The parts below are internals and related accessories — a valve basket, a trip or release element, and a blow-off or relief-valve stem. SUNHY supplies these components to the customer’s print. It does not manufacture complete slam-shut or relief valves.

This page describes a made-to-print capability, not a stock catalogue. Manufacture follows the customer’s current drawing revision, together with the stated material, finish and quality requirements. Unspecified points are flagged before production rather than assumed.

Capability example of a brass slam-shut basket, catalogue type SH-BR-SS-BK. Colour in the model does not represent the specified material or finish.
Capability example SH-BR-SS-BK, an internal basket — not a complete slam-shut valve. Colour in the model does not represent the specified material or finish.

Capability examples from the 2026 gas-equipment catalogue

Brass slam-shut basket capability example SH-BR-SS-BK, shown as a catalogue render.

SH-BR-SS-BK

Brass slam-shut basket

CuZn36Pb2 / CuZn39Pb2 / CuZn40Pb2 · Natural finish

Internal basket for a safety shut-off (slam-shut) valve, produced to the agreed drawing. Accepted alternatives only if agreed.

Brass trip or release element capability example SH-BR-SS-TR, shown as a catalogue render.

SH-BR-SS-TR

Brass trip element

CuZn39Pb3 / CuZn40Pb2 · Natural finish

Trip / release element for a slam-shut mechanism, machined to the print.

Brass relief-valve stem capability example SH-BR-RV-01, shown as a catalogue render.

SH-BR-RV-01

Brass relief-valve stem

CuZn39Pb3 / CuZn40Pb2 · Natural finish

Internal stem for a blow-off or relief valve. Thread and form as specified on the drawing.

The parts shown are capability examples, not stock items. Colour in a model does not represent the specified material or finish. Geometry, material, finish and inspection are taken from the customer’s current drawing. Catalogue type codes are SUNHY designations for these examples; they do not replace the customer’s item number or drawing revision.

Typical use
Internal components for safety shut-off (slam-shut) and related relief functions
Basket material
CuZn36Pb2 / CuZn39Pb2 / CuZn40Pb2; accepted alternatives only if agreed
Trip and stem material
CuZn39Pb3 / CuZn40Pb2, grade as named on the print
Example finish
Natural, as machined
Manufacturing route
Complex internals are typically assessed for CNC
Scope
Internals and accessories only — not complete slam-shut or relief valves

Internals, not complete valves

SUNHY does not manufacture complete slam-shut valves or relief valves, and it does not set, test or certify a finished safety device. The enquiry should treat each item as a component defined by the current drawing: a basket, a trip or release element, a stem, or a related turned accessory.

Related internal geometries can be reviewed on the same enquiry when the drawings are provided. Sourcing slam-shut internals as components.

Manufacturing route

Complex internals are typically assessed for CNC, or for a combined route where volume supports it. Thread and form on the relief-valve stem, and the open area or seating features on a basket, are taken from the print — they are not inferred from the catalogue render.

Inspection and documents

Inspection is written against the drawing and the order. Material certificates and any special inspection of the finished surface are agreed with the order scope. Quality-system certificates and product approvals are referenced in a quotation only after the legal entity, site, product scope and validity have been confirmed for that order.

What to send with the RFQ

  • The current 2D revision, and a 3D model if available
  • Specified alloy or grade, temper or delivery condition
  • Finish: natural / as machined, zinc plate, or another system, including any requirement after coating
  • Thread system and size, tolerance, and the sealing or assembly method
  • Prototype or sample quantity versus annual or lot volume, and the intended need date
  • Documents required, for example EN 10204 3.1, inspection records or PPAP — confirmed in the quotation
  • Any process constraint already decided (cold heading, CNC, or a combined route)

The quotation will address manufacturability, the proposed route — cold heading, CNC, or a combination — sample timing, and the document package. What to include in a made-to-print RFQ.

Questions buyers usually ask

Does SUNHY manufacture complete slam-shut valves?

No. SUNHY supplies internals and related accessories made to the customer’s print. It does not manufacture complete slam-shut or relief valves.

Send the print for the internal component.

A basket, trip element, stem or related accessory is quoted from the current drawing, not as a complete valve.