Aluminium diaphragm housings are machined component parts for a regulator-stage diaphragm. They are not a complete regulator, and they are not an assembled stage. SUNHY produces them from the customer’s current drawing, together with the stated aluminium grade, temper, finish and quality requirements. This note is for buyers who need that distinction to be clear in the RFQ, and who may also have related aluminium parts on the same gas-equipment programme.

The forms shown on the aluminium diaphragm housings page are capability examples, not a stock list. Colour in a model does not represent the specified material or finish. Catalogue type codes are SUNHY designations for those examples; they do not replace the customer’s item number or drawing revision.

What the catalogue examples actually are

Two housing geometries are shown. SH-AL-DH-01 is an example in AlMgSi1 (6081) with a natural, as-machined finish. SH-AL-DH-02 is a second geometry in EN AW-6060 AlMgSi T6, with the product standard EN 754-2 cited as an example. Temper and product standard are taken from the print, not from the photograph. Other housing forms are reviewed when a drawing is provided.

Faces, bores, sealing features and any threads on the housing follow the agreed revision. The part supplied is the housing only — not a diaphragm, not a complete regulator, and not a station. That limit of supply is the same rule used for other gas-equipment accessories on this site.

Faces, bores and sealing features

A diaphragm housing is usually a sealed interface. Flatness, surface condition, bore diameters, concentricity and any groove or thread that locates the diaphragm or a mating part are taken from the drawing. Those features are treated as part of the manufacturability review, not as optional dressing on a rough blank. If a sealing-face roughness, a specific machining lay, or a pressure-test of the housing itself is already decided, it should be written in the enquiry. A pressure-test of a housing, where it is required, is a check of that component to the agreed method. It is not a type test of a complete regulator.

Threads on the housing, if any, follow the same rule as other made-to-print parts: system, size, pitch, class of fit and the gauging condition are read from the revision. The housing is still a component. Mating parts — a cover, a connecting stub, a union nut — are quoted only when their drawings are included.

Grade, temper and finish follow the print

The aluminium grade, the temper and the product standard are read from the drawing. The catalogue examples use a natural, as-machined finish. Anodising or another finish is reviewed when it is called up on the print. A “similar” alloy or a standard decorative finish is not substituted when the drawing says something else. Alternative grades are reviewed against the drawing, the process route and the required documents, and are used only if agreed.

A wider note on how materials and finishes are treated on European gas-equipment prints, including these aluminium examples, is in materials and finishes commonly specified on European gas-equipment prints.

Related aluminium components on the same programme

Related aluminium parts — other housings, covers or rotationally symmetric components on the same regulator or station programme — can be reviewed when the drawings are provided. They remain component parts made to print. SUNHY does not manufacture complete regulators, slam-shut valves, filters or stations, and an enquiry for a housing should not be written as if a finished appliance were being quoted.

If brass or steel accessories sit at the same interface, those drawings can be included in the same enquiry. The review still treats each item as a made-to-print component.

Route, inspection and documents

Diaphragm housings are typically assessed for CNC, or for a combined route where volume supports it. The inspection plan is written against the drawing and the order: critical faces and bores, sealing features, and any thread gauging that the print requires. Material certificates and any special inspection of the finished surface are agreed with the order scope. EN 10204 3.1 may be requested and is confirmed per order; it is not assumed. A material certificate for a housing is evidence for that component, to the scope agreed in the order. It is not a certificate for a finished piece of pressure equipment, and it is not a PED, TÜV or other equipment approval.

PPAP and IMDS are reviewed when a project requires them and are confirmed in the quotation; they are not a standard inclusion on every order. Quality-system evidence is likewise confirmed per order. See documents confirmed per order.

How to write the enquiry

Send the current drawing revision, the aluminium grade, temper and product standard as specified, the finish, and the documents required. State clearly that the part is a housing or a related component, not a complete regulator. Use the request form or email anna@sunhyings.com. A wider checklist is in what to include in a made-to-print RFQ.

This article is a capability and commercial note. It is not a certificate, a dimensional data book, or evidence of customer approval. Catalogue type codes and example grades do not replace the customer’s item number, material specification or drawing revision.