Weld nuts and special nuts are among the most drawing-controlled fasteners a vehicle programme buys. The difference between a usable part and a line-stopper is often a projection height, a pilot, a thread condition after coating, or a clinch feature that has to match a parent-metal thickness. This article is for purchasing and supplier-quality engineers who need those parts made to print, rather than selected from a standard hex-nut catalogue.

SUNHY produces the families described on the weld nuts and weld elements and special nuts, lock nuts and installation elements pages from the customer drawing, together with the stated material, property class and quality requirements. The photographs and forms on those pages are capability examples, not a stock list.

Weld nuts: the print has to carry the welding intent

Weld nuts, weld bushings and related weld elements are produced for body-in-white and other automated welding applications. Projection style, location, thread condition and coating are taken from the print, not from a generic catalogue assumption. Forms that can be reviewed include hex weld nuts to DIN 929, square weld nuts to DIN 928, ring-projection nuts, D-shape and off-centre-hole nuts, and weld bushings or locating standoffs, threaded or non-threaded, when those forms are on the drawing.

Projections may be ring, three- or four-dimple, or elongated, as defined on the drawing. Ring projections are typically specified where a more continuous joint is required; dimple projections are often used for general structural attachment. The arrangement used in production is the one on the print. Features that affect automated feeding and robotic welding — orientation, pilot, chamfer and projection arrangement — are treated as part of the manufacturability review when the drawing requires them.

The final thread condition, including any gauging after welding or after coating, should be stated in the RFQ so that the process route can be set accordingly. Example specification references such as GM 11518217, 11570174, 25640395 and 11611072 describe geometry types that can be assessed from a customer print. They do not indicate that SUNHY is an approved GM supplier, or that those part numbers are in current production.

Special nuts and installation elements

Non-catalogue nuts are produced when a standard hex nut cannot meet the drawing, the material or the quality requirements. The family includes T-nuts and inserts, cap or security nuts, nylon-insert and other prevailing-torque lock nuts, clinch nuts, rivet nuts, long blind bushings, slotted cylindrical nuts, custom collars and spacers, and hex nuts of a non-catalogue height, width or recess. Left-hand, fine-pitch or otherwise special threads are reviewed when they are specified.

The installation method — clinch, rivet, weld, thread engagement or a captive feature — should be clear, together with parent-material thickness, hole condition and assembly sequence where they apply. For lock nuts, the torque window, temperature and reuse conditions help the review if they are known. Cosmetic or functional faces should be identified if an appearance or contact-face requirement applies.

Route, quantity and a change of process

The route — cold heading, CNC, or both — is selected against the geometry and the intended volume. Cold heading is the usual starting point inside the M4–M24 window when the form can be produced that way. A fully machined route is used for prototypes and for parts that will remain on CNC in production. Typical minimum quantities for special cold-forged or custom turned nuts are 10,000 to 50,000 pieces, depending on complexity and tooling. Prototypes can be machined for validation before production tooling is committed. 100-piece samples are typically available in 45 days; the window is confirmed with each enquiry.

If a first sample is machined and later lots are to be cold-headed, that change of route is identified and re-validated before serial release. Approval of a prototype is not approval of the production process unless the production-intent route has been confirmed. Cold heading versus CNC explains the same rule for the wider fastener range.

Documents and the RFQ

Dimensional, thread and coating checks are set against the drawing and the order. Prevailing-torque checks are included when the order requires them. PPAP and IMDS are reviewed when a project requires them and are confirmed in the quotation; they are not assumed as a standard inclusion on every order. EN 10204 3.1 may be requested and is confirmed per order. See documents confirmed per order and what to include in a made-to-print RFQ.

Send the current drawing revision with the request form or to anna@sunhyings.com. Mating bolts, screws or studs on the same programme can be reviewed in the same enquiry.

This article is a capability and commercial note. It is not a certificate, a dimensional data book, or evidence of customer approval. Catalogue type codes and example grades do not replace the customer’s item number, material specification or drawing revision.