Safety shut-off, or slam-shut, valves are finished devices. They are designed, assembled, set and certified by the equipment manufacturer. What a component supplier can usefully offer, when the buyer wants a made-to-print source, is the internal parts: a basket, a trip or release element, a stem, or a related turned accessory, each defined by a current drawing revision.
This distinction matters in an RFQ. If the enquiry is written as if a complete valve were being purchased, the scope is wrong, and so are the documents, the liability and the inspection plan. SUNHY supplies internals and related accessories to the customer’s print. It does not manufacture complete slam-shut or relief valves, and it does not set, test or certify a finished safety device.
What the catalogue examples actually are
The 2026 gas-equipment catalogue shows three brass examples, collected on the slam-shut internals page.
SH-BR-SS-BK is a brass slam-shut basket, an internal basket for a safety shut-off valve, in CuZn36Pb2, CuZn39Pb2 or CuZn40Pb2, with a natural, as-machined finish. Accepted alternative grades are used only if agreed. The open area, seating features and overall form are taken from the drawing; they are not inferred from the catalogue render.
SH-BR-SS-TR is a brass trip or release element for a slam-shut mechanism, in CuZn39Pb3 or CuZn40Pb2, machined to the print, again with a natural finish.
SH-BR-RV-01 is a brass relief-valve stem — an internal stem for a blow-off or relief valve — in CuZn39Pb3 or CuZn40Pb2. Thread and form are as specified on the drawing.
These type codes are SUNHY designations for capability examples. They do not replace the customer’s item number or drawing revision, and they are not stock items or a dimensional data book. Colour in a model does not represent the specified material or finish. Related internal geometries can be reviewed on the same enquiry when the drawings are provided.
How to write the enquiry
Treat each item as a component. Name the part as it appears on the drawing — basket, trip element, stem, or another internal — and send the current 2D revision, with a 3D model if it is available. State the alloy or grade, the finish, the thread where one is called up, the volume and timing, and the documents required. If a process constraint has already been decided, include it.
Do not ask the component supplier to assume a valve type, a set pressure, a flow coefficient or a certification mark that belongs to the finished device. Those requirements may appear as context, but they do not define the machined part unless they are translated into drawing requirements: dimensions, material, finish and inspection.
A more general checklist is in what to include in a made-to-print RFQ.
Route, inspection and documents
Complex internals are typically assessed for CNC, or for a combined route where volume supports it. Cold heading remains an M4–M24 window unless a combined or fully machined route is agreed for sizes or shapes outside that window. 100-piece samples are typically available in 45 days; the window is confirmed with each enquiry.
The inspection plan is written against the drawing and the order, not assumed from a catalogue statement. Material certificates and any special inspection of the finished surface are agreed with the order scope. EN 10204 3.1 mill test certificates may be requested and are confirmed per order. PPAP can be reviewed when a project requires it.
Quality-system certificates, third-party reports and product approvals are referenced in a quotation only after the legal entity, manufacturing site, product scope and validity have been confirmed for that order. Orders may reference EN, PED or other specified standards; those names identify the requirement on the drawing or in the specification, not a blanket company mark, and not a claim that SUNHY places a finished safety valve on the market. See documents confirmed per order and the quality page.
Related components on the same programme
The same purchasing package may include aluminium diaphragm housings for regulator stages, brass connecting stubs, or filter closing elements. Each of those families is also a component capability: housings are not complete regulators, and closing elements are not complete filters. They can be reviewed together when the drawings are provided. The gas-equipment components hub lists the families.
Nothing in a component quotation should be read as evidence that a slam-shut or relief valve has been approved, type-tested or placed on the market by SUNHY. If the buyer’s quality pack needs that kind of evidence, it has to come from the equipment manufacturer and from the standards that apply to the finished device, not from a made-to-print machining enquiry.
Enquiries are handled in English. Send the print with the request form or to anna@sunhyings.com.
This article is a capability and commercial note. It is not a certificate, a dimensional data book, or evidence of customer approval. Catalogue type codes and example grades do not replace the customer’s item number, material specification or drawing revision.