Clinch nuts and rivet nuts are installation elements. They are produced from the customer drawing, not selected from a catalogue to “suit” a panel that is described only in an email. Panel thickness, hole size and preparation, the head or body style, the thread and the finish all have to be on the current revision. A commercial clinch nut or rivet nut is not substituted for a missing geometry.
SUNHY reviews these forms in the special nuts and installation elements family, alongside T-nuts, lock nuts and other special nuts. The part supplied is the nut, made to the print. The customer’s press, riveting tool or in-place installation process remains the customer’s process unless a specific trial or instruction is agreed in writing for the order.
Panel and hole data are drawing inputs
A clinch nut is only meaningful against a stated panel thickness, a hole size and, where it matters, a hole condition or material. A rivet nut likewise has a grip range and a body and head style that have to match the print. If those data are missing, they are open items. They are not completed from a catalogue column or from a photograph of a similar assembly.
Head style, shank or body diameter, under-head features and any anti-rotation or load-bearing geometry belong on the same revision. A thin-head or a countersunk form is not assumed in order to reduce height, and a round body is not substituted for a hexagonal body, or the reverse, without a change to the drawing.
Thread, finish and the installed condition
The thread system, pitch and class of fit are taken from the print, including the condition in which the thread will be gauged. If the nut will be coated before installation, and the finished thread must still gauge, that requirement has to be written down. The general rules are the same as in the note on thread standards, pitch and gauging.
Some programmes also care about the thread after the nut has been installed in the panel — for example if installation load could affect a thin wall or a close class of fit. If that installed condition is a requirement, it belongs in the RFQ. Installation itself is not performed here as a complete welded or pressed assembly unless that work is explicitly agreed; the default scope is the component.
Route, volume and a change of process
Clinch and rivet nuts may be produced by cold heading, by machining, or by a combined route, depending on the geometry, the material and the volume. The M4–M24 heading window used elsewhere on this site is a review starting point, not a promise that every installation nut will be headed. The reasoning is the same as in the note on cold heading versus CNC.
A machined sample is useful for a fit check or a first layout. It is not approval of a later headed or combined series route. A change of route, or a change of the installation-related features on the nut, is a process change and is re-validated before serial release — see from prototype samples to series production.
What is, and is not, included
The quotation covers the nut as drawn: material, finish, thread, dimensional and, when specified, functional checks on the component. Punch tools, panel dies, riveting tools and the welding or pressing process that puts the nut into the customer’s part are outside that scope unless they are named and agreed. A torque-to-turn or push-out test on a customer panel is included only when the order requires it and the method is defined.
Documents such as EN 10204 3.1, inspection records, PPAP or IMDS are confirmed per order, not automatic. The existing note on order documents applies.
Finish at the installation feature, and related forms
The coating or the bare metal at a clinch shank or a rivet-nut body can matter as much as the thread finish. Some programmes require a specified zinc, zinc-nickel or zinc-flake system on the whole nut; others require a particular appearance on the head that remains visible after installation. Those requirements are taken from the print. A finish that is convenient for heading is not substituted, and a colour is not treated as the system — a point also made in the coating notes on this site.
Clinch nuts and rivet nuts are not interchangeable with T-nuts, weld nuts or lock nuts in order to simplify an RFQ. If the actual part is a T-nut or an insert, the note on T-nuts and other special installation nuts is the better starting point; if it is a weld nut, see weld projections and location features. The installation method named on the drawing decides the family, not the informal name used in an email.
What to write in the RFQ
Send the current revision, and include panel thickness, hole size and preparation, the nut style, the thread, the finish, the volume and the documents or tests you need. If installation is to be considered in the acceptance of the nut, describe the condition and the method. Use the request form or email anna@sunhyings.com. Related forms are covered in the notes on T-nuts, prevailing-torque and lock nuts, and weld nuts and special nuts.
This article is a capability and commercial note. It is not a certificate, a dimensional data book, or evidence of customer approval. Catalogue type codes and example grades do not replace the customer’s item number, material specification or drawing revision.