A weld nut is defined by more than a thread and a hex. The projection style and height, any pilot or locating feature, and the body form — round, square, D-shape or another outline on the print — have to be taken from the current revision. Those features control how the nut sits on the customer’s sheet and how it will be welded. They are not completed from a catalogue type code or from a photograph on this site.

SUNHY produces weld nuts and weld elements from the customer drawing. The earlier note on weld nuts and special nuts sets out the overall commercial scope. This note looks more closely at the weld-intent geometry that the print has to carry. The welding process itself — current, time, force, electrode and fixture — remains the customer’s process unless a specific trial is agreed in writing.

Projection style and height are not inferred

Ring, spot or other projection arrangements, and the height and position of each projection, are drawing-controlled. “A standard projection weld nut” is not a substitute for those dimensions. If the customer standard that defines the projection is already chosen, it should be named on the revision or attached to the RFQ. A projection height that is convenient for heading is not substituted for the height on the print.

The number of projections, their symmetry, and any relationship to flats or to a pilot must be visible on the same revision. Where a 3D model is supplied, it helps the review of form and tool access, but it does not override the 2D projection data unless the enquiry says so in writing.

Pilots, location and body form

A pilot or spigot that locates the nut in a hole has a diameter, a length and a fit that have to be stated. So do any notches, flats or feed features that the customer’s placement process will use. If those features are required in production but are missing from the drawing, they are open items, not details that can be copied from a similar nut.

Body form is likewise taken from the print. Round or ring-projection nuts, square weld nuts, and D-shape or compact bodies are all forms that can be reviewed, as the product page describes. The outline in a catalogue example is not a licence to change the customer’s outline, the height of the body, or the position of the thread relative to the weld face.

Thread condition, coating and the weld face

The thread system, pitch and class of fit are taken from the print, including the condition in which the thread will be gauged — before coating, after coating, and, if the customer requires it, after welding. If the thread must still gauge after the customer’s weld, that requirement has to be written down so that the route and the inspection plan can reflect it. The general rules are in the note on thread standards, pitch and gauging.

Coating on a weld nut needs particular care: some programmes require an uncoated weld face or a specified coating that is compatible with the weld. Partial coating or masking is produced only when the print states it, not as an informal shop practice. On high-strength parts, any hydrogen-embrittlement control should be named with the coating — see coatings for high-strength fasteners.

What the quotation does and does not include

The quotation is for the nut or weld element as drawn. Weld current, electrode geometry, fixture design and the weld schedule for the customer’s sheet are not implied, and a complete welded assembly is not manufactured. A push-out, peel or torque-to-turn test on a customer coupon is included only when the order requires it and the method is defined.

The manufacturing route — heading, machining or a combination, typically reviewed in the M4–M24 heading window where it applies — follows the geometry and the volume. A change of projection geometry or of route is a process change and is re-validated before serial release, as described in the note on prototype samples and series production.

Material, property class and the sheet on the customer side

The nut material and, where it is specified, the property grade are taken from the print, not from a preferred heading steel. If the customer’s sheet grade, coating or thickness is relevant to the nut design, that information should be on the nut drawing or attached to the RFQ as a reference. It does not turn the quotation into a weld-process study, and it does not authorise a change to the projection height in order to “suit” an unstated sheet.

Weld quality on the customer’s assembly — expulsion, pull-out, or a stated nugget size — is the customer’s process result. Those results are not offered as a SUNHY capability figure. If a coupon test is to be performed as part of the nut’s acceptance, the coupon, the weld schedule and the acceptance rule have to be defined by the customer and agreed for the order. Until then, acceptance of the nut remains the dimensions, the thread and the other characteristics on the component print.

What to write in the RFQ

Send the current revision and include projection style and height, pilots or locating features, body form, thread and gauging condition, coating (including any uncoated weld face), material or property class, volume, and the documents or tests you need. Use the request form or email anna@sunhyings.com. Related installation elements are covered in the notes on clinch nuts and rivet nuts and on weld nuts and special nuts.

This article is a capability and commercial note. It is not a certificate, a dimensional data book, or evidence of customer approval. Catalogue type codes and example grades do not replace the customer’s item number, material specification or drawing revision.